What You Can Do In The Port Binding Screens; The Port Binding General Screen; The Port Binding Screen - ZyXEL Communications AMG1312-T Series User Manual

Chapter 12 Port Binding
If a WAN PVC is bound to an ethernet port, traffic from the ethernet port will only be forwarded
through the specified WAN PVC and vice versa. If a port is not in a port binding group, traffic to and
from the port will be forwarded according to the routing table. See the tutorial section
page 34) for more details on configuring port binding for multiple WAN connections.

12.1.1 What You Can Do in the Port Binding Screens

• Use the General screen
• Use the Port Binding screen
• Use the Port Binding Summary screen
binding groups.

12.2 The Port Binding General Screen

Use this screen to activate port binding and set up port binding groups. Click Network Setting >
Port Binding to display the following screen.
Figure 78 Network Setting > Port Binding
The following table describes the labels in this screen.
Table 58 Network Setting > Port Binding
LABEL
Activated Port Binding Activate or deactivate the port binding feature.
Apply

12.3 The Port Binding Screen

Use this screen to set up port binding groups. Click Network Setting > Port Binding > Port
Binding to display the following screen.
158
(Section 12.3 on page
(Section 12.3 on page
(Section 12.3.1 on page
DESCRIPTION
Add the selected port binding group configuration.
158) to activate port binding.
158) to set up port binding groups.
159) to view configured port
AMG1312-T Series User's Guide
(Section on