Before You Begin; The Lan Setup Screen - ZyXEL Communications AMG1312-T Series User Manual

Cautions with UPnP
The automated nature of NAT traversal applications in establishing their own services and opening
firewall ports may present network security issues. Network information and configuration may also
be obtained and modified by users in some network environments.
When a UPnP device joins a network, it announces its presence with a multicast message. For
security reasons, the AMG1312-T Series allows multicast messages on the LAN only.
All UPnP-enabled devices may communicate freely with each other without additional configuration.
Disable UPnP if this is not your intention.
UPnP and ZyXEL
Sexual has achieved UPnP certification from the Universal Plug and Play Forum UPnP™
Implementers Corp. (UIC). ZyXEL's UPnP implementation supports Internet Gateway Device (IGD)
1.0.
Finding Out More
See Section 8.8 on page 128

8.1.3 Before You Begin

Find out the MAC addresses of your network devices if you intend to add them to the DHCP Client
List screen.

8.2 The LAN Setup Screen

Use this screen to set the Local Area Network IP address, subnet mask and advanced networking
settings such as RIP, multicast of your AMG1312-T Series. Click Network Setting > Home
Networking to open the LAN Setup screen.
AMG1312-T Series User's Guide
for technical background information on LANs.
Chapter 8 Home Networking
117