ZyXEL Communications AMG1312-T Series User Manual page 241

Figure 149 Windows Vista: Internet Protocol Version 4 (TCP/IPv4) Properties
10 Click OK to close the Internet Protocol Version 4 (TCP/IPv4) Properties window.
11 Click Close to close the Local Area Connection Properties window.
Close the Network Connections window.
12
13 Turn on your AMG1312-T Series and restart your computer (if prompted).
Verifying Settings
Click Start, All Programs, Accessories and then Command Prompt.
1
In the Command Prompt window, type "ipconfig" and then press [ENTER]. You can also open
2
Network Connections, right-click a network connection, click Status and then click the Support
tab.
Macintosh OS 8/9
Click the Apple menu, Control Panel and double-click TCP/IP to open the TCP/IP Control
1
Panel.
AMG1312-T Series User's Guide
Appendix A Setting up Your Computer's IP Address
241