What You Can Do In The Port Binding Screens; The Port Binding Screen - ZyXEL Communications AMG1302-T10A User Manual

Chapter 13 Port Binding
If a WAN PVC is bound to an ethernet port, traffic from the ethernet port will only be forwarded
through the specified WAN PVC and vice versa. If a port is not in a port binding group, traffic to and
from the port will be forwarded according to the routing table.

13.1.1 What You Can Do in the Port Binding Screens

• Use t he Port Binding screen
binding groups.
• Use t he Port Binding Summary screen
binding groups.

13.2 The Port Binding Screen

Use this screen to activate port binding and set up port binding groups. Click Advanced > Port
Binding to display the following screen.
Figure 92 Advanced > Port Binding
The following table describes the labels in this screen.
Table 61 Advanced > Port Binding
LABEL
Port Binding
Active
Group Index
ATM VCs
Ethernet
WLAN
164
(Section 13.2 on page
(Section 13.2.1 on page
DESCRIPTION
Activate or deactivate the port binding feature.
Select the index number for the port binding group.
When a port is assigned to a port binding group, traffic will be forwarded to the other
ports in the group, but not to ports in other groups. If a port is not included in any
groups, traffic will be forwarded according to the routing table.
Select the ATM VC (PVC) to include in the port binding group. Each ATM VC can only
be binded to one group.
Select the Ethernet (Eth) ports to include in the port binding group. Each Ethernet
port can only be binded to one group.
Select the WLAN (AP) connections to include in the port binding group. Additional APs
can be enabled on the More AP screen
164) to activate port binding and set up port
165) to view configured port
(Section 8.3 on page 106).
AMG1302-T10A User's Guide