ZyXEL Communications AMG1312-T Series User Manual page 188

Chapter 16 Parental Control
Table 73 Parental Control: Add/Edit (continued)
LABEL
Parental Control
Profile Name
Home Network User
Internet Access Schedule
Day
Time of Day to Apply
Network Service
Network Service
Setting
Add new service
Active
Service Name
Protocol
Port
Modify
Blocked Site/URL
Apply
Cancel
188
DESCRIPTION
Enter a descriptive name for the rule.
Select the LAN user that you want to apply this rule to from the drop-down list box. If
you select Custom, enter the LAN user's MAC address. If you select All, the rule
applies to all LAN users.
Select check boxes for the days that you want the AMG1312-T Series to perform
parental control.
Enter the starting and ending time that the LAN user is allowed access.
If you select Block, the AMG1312-T Series prohibits the users from viewing the Web
sites with the URLs listed below.
If you select Access, the AMG1312-T Series blocks access to all URLs except ones
listed below.
Click this to show a screen in which you can add a new service rule. You can configure
the Service Name, Protocol, and Name of the new rule.
This shows whether a configured service is activated or not.
This shows the name of the rule.
This shows the protocol of the rule.
This shows the port of the rule.
Click the Edit icon to go to the screen where you can edit the rule.
Click the Delete icon to delete an existing rule.
Enter the URL of web sites or URL keywords to which the AMG1312-T Series blocks
access.
Click Apply to save your changes.
Click Cancel to exit this screen without saving.
AMG1312-T Series User's Guide