What You Can Do In The Port Isolation Screens; The Port Isolation General Screen; The Port Isolation Screen - ZyXEL Communications eircom D1000 User Manual

Chapter 10 Port Isolation
If a WAN PVC is bound to an Ethernet port, traffic from the Ethernet port will only be forwarded
through the specified WAN PVC and vice versa. If a port is not in a port isolation group, traffic to
and from the port will be forwarded according to the routing table.

10.1.1 What You Can Do in the Port Isolation Screens

• Use the General screen
• Use the Port Isolation screen
• Use the Port Isolation Summary screen
isolation groups.

10.2 The Port Isolation General Screen

Use this screen to activate port isolation and set up port isolation groups. Click Network Setting >
Port Isolation to display the following screen.
Figure 93 Network Setting > Isolation
The following table describes the labels in this screen.
Table 49 Network Setting > Port Isolation
LABEL
Activated Port
Isolation
Apply

10.3 The Port Isolation Screen

Use this screen to set up port isolation groups. Click Network Setting > Port Isolation > Port
Isolation to display the following screen.
136
(Section 10.3 on page
(Section 10.3 on page
(Section 10.3.1 on page
DESCRIPTION
Activate or deactivate the port isolation feature.
Add the selected port isolation group configuration.
136) to activate port isolation.
136) to set up port isolation groups.
137) to view configured port
eircom D1000 modem User's Guide