The Ssh Screen - ZyXEL Communications AMG1312-T Series User Manual

Chapter 25 Remote Management
packet from being sent. This keeps outsiders from discovering your AMG1312-T Series when
unsupported ports are probed.
Note: If you want your device to respond to pings and requests for unauthorized services,
you will also need to configure the firewall accordingly by disabling SPI.
Figure 127 Maintenance > RemoteMGMT > ICMP
The following table describes the labels in this screen.
Table 94 Maintenance > RemoteMGMT > ICMP
LABEL
Respond to Ping on The AMG1312-T Series will not respond to any incoming Ping requests when Disable is
Secured Client IP
Address
Apply
Cancel

25.8 The SSH Screen

You can use Secure SHell (SSH) to securely access the AMG1312-T Series's command line interface.
Specify which interfaces allow SSH access and from which IP address the access can come. SSH is
a secure communication protocol that combines authentication and data encryption to provide
secure encrypted communication between two hosts over an unsecured network.
Click Maintenance > RemoteMGMT > SSH tab to display the screen as shown.
218
DESCRIPTION
selected. Select LAN to reply to incoming LAN Ping requests. Select WAN to reply to
incoming WAN Ping requests. Otherwise select LAN & WAN to reply to both incoming
LAN and WAN Ping requests.
A secured client is a "trusted" computer that is allowed to send Ping requests to the
AMG1312-T Series.
Select All to allow any computer to send Ping requests to the AMG1312-T Series.
Choose Range to just allow the computer(s) with an IP address in the range that you
specify to send Ping requests to the AMG1312-T Series.
Click this to save your changes.
Click this to restore your previously saved settings.
AMG1312-T Series User's Guide