Access The Amg1312-T Series From The Internet Using Ddns; Registering A Ddns Account On Www.dyndns.org - ZyXEL Communications AMG1312-T Series User Manual

Interface
To Queue
Source MAC Address
Source Port Range
Protocol ID
This maps e-mail traffic to queue 1 created in the previous screen (see the Source Port Range
field). This also maps your computer's MAC address to queue 1 (see the Source MAC Address
field).
4.11 Access the AMG1312-T Series from the Internet Using
DDNS
If you connect your AMG1312-T Series to the Internet and it uses a dynamic WAN IP address, it is
inconvenient for you to manage the device from the Internet. The AMG1312-T Series's WAN IP
address changes dynamically. Dynamic DNS (DDNS) allows you to access the AMG1312-T Series
using a domain name.
To use this feature, you have to apply for DDNS service at www.dyndns.org.
This tutorial shows you how to:
•

Registering a DDNS Account on www.dyndns.org

• Configuring DDNS on Your AMG1312-T Series
• Testing the DDNS Setting
Note: If you have a private WAN IP address, then you cannot use DDNS.
4.11.1 Registering a DDNS Account on www.dyndns.org
Open a browser and type http://www.dyndns.org.
1
AMG1312-T Series User's Guide
Select From LAN.
Link this to a queue created in the Network Setting > QoS
> Queue Setup screen, which is the 1 queue created in
this example.
Type the MAC address of your computer -
AA:FF:AA:FF:AA:FF. Type the Source Mac Netmask if
you know it.
Enter the port number to which the rule should be applied -
25 for SMTP.
Select the IP protocol type - TCP.
w.x.y.z
http://zyxelrouter.dyndns.org
A
a.b.c.d
Chapter 4 Tutorials
59