Replacing Staple Cartridges - Xerox WorkCentre 7800 series User Manual

Replacing Staple Cartridges

This section includes:
• Replacing Staples in the Integrated Finisher ......................................................................................................... 191
• Replacing Staples in the Main Stapler of the Office Finisher LX ................................................................... 193
• Replacing Staples in the Booklet Maker of the Office Finisher LX ................................................................ 195
• Replacing Staples in the Main Stapler of the Professional Finisher ............................................................. 196
• Replacing Staples in the Booklet Maker of the Professional Finisher .......................................................... 198
A message appears on the control panel when a staple cartridge is empty.
Replacing Staples in the Integrated Finisher
WARNING:
Do not perform this procedure while the printer is copying or printing.
1. Open the finisher door as shown.
2. Grip the staple cartridge by the orange handle and pull it firmly toward you to remove it.
3. Remove any loose staples or other debris from inside the finisher.
4. Pinch both sides of the staple case (1) and remove the staple case from the cartridge (2).
WorkCentre 7800 Series Multifunction Printer
Maintenance
191
User Guide