Replacing Staple Cartridges - Xerox WorkCentre 7500 Series User Manual
Multifunction printer
Hide thumbs
Also See for WorkCentre 7500 Series:
- System administration manual (195 pages) ,
- Quick use manual (20 pages) ,
- Quick manual (4 pages)
Table of Contents
Advertisement
Replacing Staple Cartridges
This section includes:
•
Replacing Staples in the Main Stapler of the Office Finisher LX .................................................................. 179
•
Replacing Staples in the Booklet Maker of the Office Finisher LX ............................................................... 181
•
Replacing Staples in the Main Stapler of the Professional Finisher ............................................................ 182
•
Replacing Staples in the Booklet Maker of the Professional Finisher......................................................... 184
A message appears on the control panel when a staple cartridge is empty.
Replacing Staples in the Main Stapler of the Office Finisher LX
WARNING:
Do not perform this procedure while the printer is copying or printing.
1.
Open the finisher door as shown.
2.
Reach into the finisher cabinet and pull the stapler toward you until it stops.
3.
Push the stapler to the right as shown.
WorkCentre 7500 Series Multifunction Printer
Maintenance
179
User Guide
Advertisement
Chapters
Table of Contents
Troubleshooting
