Table of Contents
Advertisement
Problem
"d" is lit in the display
and the oven is not heat-
ing up No air circulation
If the troubleshooting tips above do not resolve your problem, please contact
your dealer or the Customer Care Department.
WARNING!
Repairs to the appliance must only be carried out by qualified service engineers.
Considerable danger to the user may result from improper repairs.
In the case of misuse the visit by the Customer Service technician or dealer will not
be free of charge, even during the warranty period.
Information for appliances with a metal front: Due to the cool front of your ap-
pliance, there may be short term condensation of the inner door glass after opening
the door, during or shortly after baking or roasting.
Electrical Connection
The oven is designed to be connected to 230-240V~(50Hz) electricity supply.
The oven has an easily accessible terminal block which is marked as follows:
Letter L - Live terminal
Letter N - Neutral terminal
- Earth terminal
CAUTION!
This oven must be earthed!
The cable used to connect the oven to the electrical supply must comply to the
specifications given below.
For UK use only
Possible cause
Test mode is switched on
Electrical Connection
Remedy
Switch off the appliance. Press and
hold the
and
buttons at the
same time until the acoustic signal
sounds and the "d" indicator goes
out
63
Advertisement
Table of Contents
