Changing Your Station Passcode - Mitel 5312 User Manual

Call Features

Changing Your Station Passcode

You can use Remote Programming to change the station (phone) passcode. See
details on setting up a station passcode for your extension.
To change the station passcode using Remote Programming:
1. Do one of the following:
2. Dial 359.
3. Enter your extension number.
4. Enter your passcode followed by #.
5. Dial 392.
6. Enter the new passcode followed by #.
7. Enter the new passcode again followed by #.
Page 56

Call your DISA number (provided by your system administrator). If necessary, enter
your DISA security code.

Use any phone on the system.
Mitel ® 5312/5324 IP Phone User Guide – Issue 3, February 2011
page 50 for