Placing Calls On Hold; Entering A Hookflash - Mitel 5312 User Manual

Call Features

Placing Calls On Hold

You can place calls on either Individual Hold or System Hold.


To place a call on Individual Hold:
1. Press
2. Hang up or place another call.
To place an outside call on System Hold:
1. Press
2. Hang up or place another call.
To place a call on hold and answer a waiting call:
To return to a call that is on hold:

Entering a Hookflash

Some telephone companies require you to enter a hookflash (a quick hang up and release) for
feature access.
To enter a hookflash:
Page 36
Individual Hold: Places an internal or external call on hold at your IP phone.
System Hold: Places an external call on hold in the system. You can then pick up the call
from any phone that indicates a flashing Call button for the call, including the IP phone that
placed it on hold.
(Hold). ENTER EXTENSION NUMBER appears.
(Special), and then dial 335. ENTER EXTENSION NUMBER appears.
Press (Hold), and then press the flashing IC or Call button.
Press (Hold), and then lift the handset or press
HOLDING appears.
While off-hook, press (Special), and then dial 330.
Mitel ® 5312/5324 IP Phone User Guide – Issue 3, February 2011
(Speaker). <Caller> WAS