Table of Contents
Advertisement
Beyond the Basics
Setting a Security Code or Personal
Identifi cation Number (PIN)
To play your messages from a remote location,
you will need to enter a two-digit security code or
Personal Identifi cation Number (PIN). The default
security code is 80.
From the base
Press MENU/CLOCK
1.
twice. The current
security code
appears on the base
and it is announced.
2.
Press
/select or
/select until the
desired number
appears. Press and
/select or
hold
/select to quickly
scroll through the
numbers on the
display.
3.
Press SET to select
the security code. A
confi rmation tone
sounds; the system
announces the new
security code.
From the handset
Press MENU/CLEAR.
1.
Select the ANSW.
SETUP menu, and
then the SECURITY
CODE submenu.
2.
Use the number
keypad (0 through 9)
to enter a two-digit
security code (01-99).
Press SELECT/
3.
You will hear a
confi rmation tone.
86
.
Advertisement
Table of Contents
