Answering System Set Up; Number Of Rings; Remote Code; Message Alert Tone - Radio Shack 43-329 User Manual

Answering System Set Up

Use a handset to change your answering system settings.

Number of Rings

You can choose from two, four, or six rings; or toll saver. With toll saver
selected, the answering system answers after two rings when you have
new messages, and after four rings when you have no new messages. This
enables you to check for new messages and avoid paying unnecessary long
distance charges if you are calling from out of your local area.
Press MENU/SELECT to show the menu.
1.
Press MENU/SELECT to select >ANS. SYSTEM.
2.
Press or
3.
Press or
4.
Press or
.
MENU/SELECT to confirm your selection.

Remote Code

A two-digit security code is required to access the answering system
remotely from any touch tone telephone. The preset code is 19. You can set
the code from 10 to 99.
Press MENU/SELECT to show the menu.
1.
Press MENU/SELECT to select >ANS. SYSTEM.
2.
Press or
3.
4. Press or
Press , or the dialing keys
.
MENU/SELECT to confirm.

Message Alert Tone

This telephone can beep every 10 seconds to alert you of new messages.
The tone stops when all new messages have been reviewed.
Press MENU/SELECT to show the menu.
1.
Press MENU/SELECT to select >ANS. SYSTEM.
2.
3. Press or
Press or
4.
to select >ANS SYS SETUP, then press MENU/SELECT.
to select ># OF RINGS, then press MENU/SELECT.
to choose from 2, 4, 6, or TOLL SAVER, then press
to select >ANS SYS SETUP, then press MENU/SELECT.
to select >REMOTE CODE, then press MENU/SELECT.
to select >ANS SYS SETUP, then press MENU/SELECT.
to select >MSG ALERT TONE, then press MENU/SELECT.
to select from 10 to 99, then press
1