Omron CP1E Series User Manual page 8

Manual Configuration
The CP1E CPU manuals are organized in the sections listed in the following tables. Refer to the appro-
priate section in the manuals as required.
CP1E CPU Unit Hardware User's Manual (Cat. No. W479)
(This Manual)
Section
Section 1 Overview and Specifica-
tions
Section 2 Basic System Configura-
tion and Devices
Section 3 Part Names and Functions This section describes the part names and functions of the CPU Unit,
Section 4 Programming Device
Section 5 Installation and Wiring
Section 6 Troubleshooting
Section 7 Maintenance and Inspec-
tion
Section 8 Backup Operations
Section 9 Using Expansion Units
and Expansion I/O Units
Appendices
CP1E CPU Unit Software User's Manual (Cat. No. W480)
Section
Section 1 Overview and SYSMAC
Features
Section 2 CPU Unit Memory
Section 3 CPU Unit Operation
Section 4 Initial Settings for CPU
Unit
Section 5 Programming Concepts
Section 6 I/O Memory
Section 7 File Operations
Section 8 I/O Allocation
Section 9 PLC Setup
Section 10 Overview and Allocation
of Built-in Functions
4
This section gives an overview of the CP1E, describes its features, and
provides its specifications.
This section describes the basic system configuration and unit models
of the CP1E.
Expansion I/O Units, and Expansion Units in a CP1E PLC .
This section describes the features of the CX-Programmer for CP1E
used for programming and debugging PLCs, as well as how to connect
the PLC with the Programming Device.
This section describes how to install and wire CP1E Units.
This section describes how to troubleshoot problems that may occur
with a CP1E PLC, including the error indications provided by the CP1E
Units.
This section describes periodic inspections, the service life of the Bat-
tery, and how to replace the Battery.
Backup operations cannot be used with the CP1E.
This section describes application methods for Expansion Units.
The appendices provide information on model numbers, dimensions,
wiring diagrams, and wiring serial communications for the CP1E.
This section gives an overview of the CP1E, describes its features and
application procedures, and describes the features of SYSMAC PLCs.
This section describes the types of internal memory in a CP1E CPU
Unit and the data that is stored.
This section describes the operation of a CP1E CPU Unit.
This section describes the initial settings required for a CP1E CPU Unit.
This section provides basic information on designing ladder programs
for a CP1E CPU Unit.
This section describes the types of I/O memory areas in a CP1E CPU
Unit and the details.
File operations cannot be used with the CP1E.
This section describes I/O allocation used to exchange data between
the CP1E CPU Unit and other units.
This section describes the PLC Setup, which are used to perform basic
settings for a CP1E CPU Unit.
This section lists the built-in functions and describes the overall applica-
tion flow and the allocation of the functions.
CP1E CPU Unit Hardware User's Manual(W479)
Contents
Contents