Band Scope - Icom IC-92AD Instruction Manual

■ Band scope

The band scope function allows you to visually check a
specifi ed frequency range around the center frequency.
About the sweep steps: The specified tuning step in
each frequency band
(in VFO mode)
step is used during sweep.
(in memory mode)
Single watch mode display
+DUP +DUP DTCS DTCS
FM FM PRIO WX PRIO
145 780 14
A
B
Band scope indication
D Single sweep
q Set the desired frequency as band scope center fre-
quency.
• Push [MAIN/DUAL] to select "MAIN band" during dual watch.
w Push and hold [SCOPE](1) for 1 sec. to start a single
sweep.
• 1 short and 1 long beeps sound.
• Signal conditions (strengths) appear starting from the left of the
range.
e Rotate [DIAL] to set the highlighted cursor to the desired
signal and set the frequency of the signal.
r Push [VFO] to return to normal operation.
or programmed tuning
WX EMR EMR
780
25 25
PSKIP PSKIP
µ 000 000
Sweep marker
D Continuous sweep
q Set the desired frequency as band scope center fre-
quency.
• Push [MAIN/DUAL] to select "MAIN band" during dual watch.
w Push and hold [SCOPE](1) for 3 sec. to start continuous
sweep.
• 2 short beeps sound after 1 short and 1 long beeps.
• Signal conditions (strengths) appear starting from the left of the
range.
e Push and hold [SCOPE](1) for 1 sec. to cancel sweep.
• Pushing [SQL] also cancels sweep.
r Push [VFO] to return to normal operation.
[SQL]
1
CLR
SCOPE
• The receive audio during sweeping can be muted in
sounds set mode. See p. 115 for details.
• We recommend setting the tuning step to less then
20 kHz when using band scope function.
• Even if a strong signal is present, it may not be displayed
on the band scope if the tuning step is set to wide (ex.125
kHz, 200 kHz, etc)
• The display frequency's audio sounds for single watch op-
eration within 118–174MHz and 350–470MHz regardless
"Scope AF Output" setting in the MENU screen.
• If ghost waveform or audio appear, operate follow to avoid
those. "tuning step changing," "selecting dualwatch," or
"changing non sweep frequency if dualwatch operating".
BASIC OPERATION
+DUP +DUP DTCS DTCS
FM FM PRIO PRIO WX WX EMR EMR
14 145 780 780
25 25
A
B
PSKIP PSKIP
µ 000 000
5
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
23