Frequency And Channel Setting; Main Band Selection - Icom IC-92AD Instruction Manual

4

FREQUENCY AND CHANNEL SETTING

■ Main band selection

The IC-92AD has two independent operating bands; A band
and B band
(VFO A)
0.495 MHz to 999.990 MHz*, and B band
ate 118 MHz to 174 MHz and 350 MHz to 470 MHz.
* Some frequency ranges are blocked for the U.S.A. version by regu-
lation.
NOTE: When in dualwatch mode, transmission is avail-
able on the MAIN band only.
14
. A band can operate
(VFO B) (VFO A)
(VFO B)
Single band operation
• Selecting A band
+DUP +DUP DTCS DTCS
FM FM PRIO WX PRIO WX EMR EMR
146 010 14 010
A
MemoName MemoName
PSKIP PSKIP
µ 000 000
LOW LOW
ATT ATT
Push
• Selecting B band
+DUP +DUP DTCS DTCS
FM FM PRIO WX PRIO WX EMR EMR
44 440 000 000
B
MemoName MemoName
PSKIP PSKIP
µ 000 000
LOW LOW
ATT ATT
D How to change the main band
➥ Push [MAIN/DUAL] to toggle between A and B band.
can oper-
➥ Push and hold [MAIN/DUAL] for 1 sec. to turn the dual-
watch operation ON and OFF.
• While in dualwatch operation, the display indicates A band in
the upper half and B band in the lower half.
➥ During dualwatch operation, push [MAIN/DUAL] to toggle
between A band or B band as the main operating band.
Dualwatch operation
• Selecting upper side as main band
146 010 14
440 000 44
Push
for 1 sec.
• Selecting lower side as main band
146 010 14
440 000 44
+DUP +DUP DTCS DTCS W PS PS
010
PRIO PRIO
µ 000 000
FM FM
+DUP +DUP DTCS DTCS W PS PS
000
PRIO PRIO EM EM
µ 000 000
FM FM
Push
+DUP +DUP DTCS DTCS W PS PS
010
PRIO PRIO
µ 000 000
FM FM
+DUP +DUP DTCS DTCS W PS PS
000
PRIO PRIO EM EM
µ 000 000
FM FM