Notices - Icom IC-92AD Instruction Manual

NOTICES

D Using the optional HM-175GPS
Noise signals from the HM-175GPS may interfere with the
IC-92AD's AM radio or HF band reception.
In this case, set the HM-175GPS's microphone cable as
distant to the antenna as far as possible, or turn off the HM-
175GPS.
D Data output from HM-175GPS
The optional HM-175GPS outputs GPS data (position data,
etc.) to IC-92AD at intervals while receiving only.
Therefore, the transceiver is not updated GPS data while
transmitting.
The transceiver transmits GPS data that was received prior
to the last IC-92AD DV mode transmit.
D About OPC-1797
• NEVER connect the optional OPC-1797
with non-Icom article specifi ed.
• When connecting a monaural plug to 2.5 (d) mm, it acts as
short and becomes a cause of failure.
• Turn power OFF when connecting or disconnecting the
OPC-1797.
CONNECTION CABLE
Icom, Icom Inc. and the
Incorporated (Japan) in the United States, the United Kingdom,
Germany, France, Spain, Russia and/or other countries.
Microsoft, Windows and Windows Vista are either registered trade-
marks or trademarks of Microsoft Corporation in the United States
and/or other countries.
APRS
and other countries.
logo are registered trademarks of Icom
®
is a registered trademark of Mr. Bob Bruninga in the U.S.A.
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
iv