Making Detailed Settings (Manual Setup) - Denon AVR-590 Owner's Manual

Making detailed settings (Manual Setup)

Use this procedure to change the Audyssey Auto Setup settings or to change the various audio,
video and display settings.
The set can be used without changing these settings. Make these settings as necessary.
For a description of "Menu map" and operating instructions, see page 17.
Items that can be set with the Manual Setup procedure
n
Making the speaker settings (Speaker Setup) vpage 24
Making the HDMI settings (HDMI Setup) vpage 27
Making the audio settings (Audio Setup) vpage 28
Making other settings (Option Setup) vpage 28
n
Examples of Menu Screen Displays
Speaker Setup
4-1.Speaker Setup
1.Pre Assign
2.Speaker Config.
3.Bass Setting
4.Distance
5.Channel Level
6.Crossover Freq.
[ENT]:Select [RTN]:Back
Audio Setup
4-3.Audio Setup
1.Auto Surround Mode
2.EQ Customize
[ENT]:Select [RTN]:Back
Remote control
operation buttons
HDMI Setup
4-2.HDMI Setup
Auto Lipsync : ON
HDMI Audio Out : Amp
HDMI Control : OFF
[RTN]:Back
Option Setup
4-4.Option Setup
1.Volume Control
2.Source Delete
3.On-Screen Display
4.Quick Select Name
5.Setup Lock
[ENT]:Select [RTN]:Back
Displaying the menu
: Moves the cursor (Up/Down/Left/Right)
:
Cancel the menu
Making the speaker settings (Speaker Setup)
Use this procedure to set the speakers manually or if you wish to change the settings made with
the Audyssey Auto Setup procedure.
Setting items
Pre Assign
Normal : The surround back channel audio signals are output.
Sets the signal output
Front Height : The front height channel audio signals are output.
from the SURR. BACK /
FRONT HEIGHT PRE OUT
connectors.
Speaker Config. Front : Set the front speaker size.
• Large : Use of a large speaker that can adequately play back low
Select speaker configuration
frequencies.
and size.
(bass reproduction capability) • Small : Use of a small speaker that has inadequate playback capacity for
low frequencies.
If "Subwoofer" is set to "No" , "Front" is automatically set to "Large" .
Center : Set the presence and size of the center speaker.
• Large : Use of a large speaker that can adequately play back low
frequencies.
• Small : Use of a small speaker that has inadequate playback capacity for
low frequencies.
• None : Select when a center speaker is not connected.
• " Large" is not displayed when "Front" is set to "Small".
NOTE
• E ven if "Center" has been set to "Large" , when "Front" is set to
Select "Large" or "Small" not
"Small" , the "Center" setting automatically switches to "Small" .
according to the physical size
• Subwoofer : Set the presence of a subwoofer.
of the speaker but according
• Yes : Use a subwoofer.
to the low frequency
• No : Select when a subwooofer is not connected.
reproduction capabilities
based on the frequency set
When "Front" is set to "Small", "Subwoofer" can automatically set
at "Crossover Frequency" to "Yes".
(vpage 26).
: Decision the setting
ENGLISH
Default settings are underlined.
Setting contents
See overleaf
: Return to previous menu