Locking Out Channels; Setting Priority - Radio Shack 20-135 Quick Start Manual

Settings
• One bank must always be active. If you try to
turn off all banks, bank 0 remains.

Locking Out Channels

You can increase the scanning speed by locking
out channels that have a continuous transmission
(such as a weather channel). To lock out a channel,
quickly press L/O when the scanner stops on a
transmission. Or, manually select the channel and
then press L/O.
Note: You can still manually select
locked-out channels.
To remove the lockout from a channel, manually
select the channel, then press L/O.
To unlock all channels in the selected banks, press
MAN to stop scanning, then hold down L/O until
the scanner beeps twice.

Setting Priority

The priority feature lets you scan through
the channels and still not miss important or
interesting calls on specific channels. You can
program one stored channel in each bank as
a priority channel. The scanner checks the
designated priority channel every two seconds in
each bank.
Press PRI during scanning to turn the priority
feature on and off.
Note: If you have locked out all priority
channels,
activate the priority feature.
The scanner automatically designates each bank's
L/O
appears.
PRI
appears when priority is on.
All Loc
appears when you
26
L/O
disappears.