Searching; Limit Search; Starting Limit Search; Programming Search Ranges - Radio Shack 20-135 Quick Start Manual

Searching

Searching
Use the search function to find active frequencies.
While doing a limit search, fine tune, or service
bank search, press •/DELAY to turn the 2-second
delay on or off.

Limit Search

This feature lets you search through preset
frequency ranges. You can also program a range.
The preset frequency ranges are 25.0000 -
512.0000MHz.

Starting Limit Search

1. Press SRCH.
2. Press
3. When the scanner stops on a transmission,
quickly press PSE to stop searching and listen
to the transmission.
through the frequencies during search pause
mode, press
4. To release the hold and continue searching,
press PSE.

Programming Search Ranges

To define the search range during a limit search:
1. Press MAN then press ENT/PGM to put the
scanner in programming mode.
2. Press SRCH to go to programming search
bank mode.
SRCH
and
to search down or
PAUSE
or
14
-L-
appear.
to search up.
appears. To step
.