Advanced Programming; Transferring Data To Or From Another Scanner; Cloning Your Scanner - Radio Shack 20-135 Quick Start Manual

Advanced Programming

Advanced Programming
Transferring Data To or From another
Scanner
You can clone your scanner by transferring the
programmed data to or from another PRO-135
scanner using a connecting cable. You can also
upload or download programmed data from a PC
through wired programming.

Cloning Your Scanner

You can clone all the frequencies
in your PRO-135 to another PRO-
135 or PRO-136 using an optional
interface cable with 1/8-inch phone
plugs on both ends and software
available at your local RadioShack
or www.radioshack.com.
1. Make sure the scanners are
turned off and then plug the
cable into each scanner's
PC/IF jack.
2. Turn on both scanners.
PGM
and
3. Press
from which you want to send frequencies. This
is the "master unit." The receiving scanner is
the "slave unit."
4. Press ENT/PGM on the master unit to send
the data.
displayed in the master unit.
appear.
or on the scanner
SEnd
and the transfer progress are
30
WirEd