Setting the Signal Stalker I Options
1. Press and hold TUNE/MENU to open the
menu.
2. Press
option. (The
Stalker I menu options.)
Note: See below for a description of the
Signal Stalker I options.
3. Press ENT/PGM. The scanner flashes the
On
setting
4. Press
PGM.
5. Press
press CL to exit the menu mode.
Signal Stalker I Options
•
ALErt: Alert. Set to
hear an alert when Signal Stalker I finds a
frequency.
•
Light: Backlight. Set to
backlight to flash when Signal Stalker I finds
a frequency.
•
PGrSCr: Pager Screen. Set to
to screen out common pager frequencies.
•
Only: Only Mode. Set to
normal scanning while Signal Stalker I runs.
Set to
Signal Stalker I runs in the background.
•
Lo bnd: Low Band. Set to
Low Band (25-54MHz).
•
Airbnd: AIR Band. Set to
Band (108-137MHz).
•
Hi bnd: High Band. Set to
High Band (137-174MHz).
or
to select a Signal Stalker I menu
icon appears with Signal
OF
or
(On or Off).
or
to select
or
to select another option or
Off
to continue normal scanning while
On
OF.
or
Press ENT/
On
if you want to
On
if you want the
On
On
to turn off
On
to search VHF
On
to search AIR
On
to search VHF
19
Searching
if you want