Headset Instructions - Mitel 5212 User Manual

Headset Instructions

When using a headset, press
Headset icon
speakerphone when the endpoint is in Headset Mode. Disconnecting the headset automatically
enables the handset.
NOTES
To connect and activate the headset:
1.
2.
To turn off Headset Mode and activate the handset and speakerphone:
Mitel ® Model 5212/5224 Endpoint User Guide– Issue 2, October 2008
appears when the headset is in use. You cannot use the handset or
The headset must be hearing aid compatible (HAC).
If your headset has a power-saver mode, make sure the system administrator has
enabled the "Headset Connect Tone" feature. If this is not enabled, you may miss
the first few seconds of an incoming call.
Insert the headset jack into the Headset port
Dial 317 (Headset on/off). HEADSET MODE ON appears.
Because Headset Mode disables the handset and speakerphone, you
NOTE must turn off Headset Mode before you can use the handset or
speakerphone.
Dial 317 (Headset on/off). HEADSET MODE OFF appears.
(Speaker) to connect to or disconnect from calls. The
located on the back of the endpoint.
Getting Started
Page 7