Manual Call Forwarding; System Forwarding - Mitel 5212 User Manual

Call Features

Manual Call Forwarding

The following table describes Manual Call Forwarding options.
Call Forward Feature
Call Forward All Calls
Call Forward All Calls
Call Forward if no
Answer
Call Forward If Busy
Call Forward If No
Answer/Busy
To use Manual Call Forwarding:
1. Press the Fwd button, or dial the Manual Call Forwarding feature code from the table
2. Enter the extension number, or press the Outgoing button and then dial the telephone
To cancel a Manual Call Forwarding request:
Do one of the following:
•

System Forwarding

You can use System Forwarding to route calls based on the type of call and the idle or busy
status of your endpoint. You cannot program the System Forward destination. You can only turn
it on or off. Contact your system administrator for more information.
To turn on or turn off System Forwarding:
Page 32
All incoming calls are forwarded.
All incoming calls are forwarded.
All incoming calls are forwarded if
not answered. (The timer is set by
the system administrator.)
When your endpoint is busy, all
incoming calls are forwarded without
ringing.
All incoming calls are forwarded if
your endpoint is busy, or if you do
not answer.
above. ENTER FORWARD DEST appears.
number. FWD ALL CALLS TO <number> appears.
Press the Fwd button, and then press
CALL FORWARD CANCELED appears.
Dial 354 to turn System Forwarding on. SYSTEM FORWARD ON appears. Dial 354
again to turn System Forwarding off.
Description
(Speaker), or lift and replace the handset. ANY
Mitel ® Model 5212/5224 User Guide – Issue 2, October 2008
Code
355
355
356
357
358