Placing Internal Calls; Requesting A Callback (Queuing The Endpoint); Using Camp-On - Mitel 5212 User Manual

Placing Internal Calls

Internal calls are calls placed to other extensions in the system. Internal calls are assigned to
the Intercom (IC) button on your endpoint. Contact your system administrator for a list of
extension numbers.
To place an internal call:
If there is no answer or if the extension is busy, you can do the following:
•
•
•

Requesting a Callback (Queuing the Endpoint)

When you request a callback (queue the endpoint), the system calls you when the extension is
available and places a call to the endpoint.
To request a callback:
To cancel the callback request:

Using Camp-on

Camp-on keeps you connected to the called extension until it becomes available. You cannot
use Camp-on if the called extension is in DND, or if the call is forwarded to voice mail. See
"Using Do-Not-Disturb (DND)" on
To use Camp-on:
Mitel ® Model 5212/5224 User Guide – Issue 2, October 2008
With or without the handset lifted, dial the extension number. If you enter incorrect digits,
you can press (Hold) to move the cursor backward, deleting the last digits entered.
If you are using Handsfree Mode, listen for the double tone and then speak.
Request a callback (queue). See
Camp-on to the busy extension. See
Leave a message. See "Leaving Messages at Other Extensions" on
If there is no answer or if the extension is busy, press
then hang up. QUEUE REGISTERED FOR <name> appears. When the extension
becomes available, your extension rings.
Press 6. QUEUE REQUEST CANCELED appears.
Stay on the line and wait for the extension to become available. Do not hang up. If
Camp-on is enabled, you hear Music-on-Hold while you are waiting.
"Requesting a Callback (Queuing the
"Using Camp-on" below.
page 41.
Answering and Placing Calls
Endpoint)" below.
page 39.
(Special) followed by 6, and
Page 21