Kx-Td500 Pbx Programming For Dpt Integration - Panasonic KX-TVA50 Installation Manual

4.5 KX-TD500 PBX Programming for DPT Integration

Follow the procedure below to program the VPS card(s) for DPT Integration.
Programming procedures and availability may vary by PBX model, software version, etc. Refer to the
documentation included with the PBX or consult your dealer for more information.
1.
Assignment of the VPS card to be connected to the VPS
Note
•
If the VPS card to which the VPS will be assigned is already installed in the KX-TD500, proceed
to step 2. If installing a new VPS card, begin with step 1.
a.
Go to the 1-1 Slot Assignment screen.
b.
Assign the slot Card Type to be installed to DLC or DHLC card.
c.
Click Apply to save the card type assignment.
d.
Set Status to INS.
Document Version 3.0 2010/06
4.5 KX-TD500 PBX Programming for DPT Integration
Installation Manual 115