Panasonic KX-TVA50 Installation Manual page 41

The available Mode Switch positions are shown in the following table. The black area in the switch illustration
indicates the direction of the switch.
Switch Position
1 2 3 4
0
0
1
1
1 2 3 4
2
0
1
1 2 3 4
3
0
1
4
1 2 3 4
5
0
1
1 2 3 4
6
0
1
7
1 2 3 4
8
0
1
9
1 2 3 4
10
0
1
1 2 3 4
11
0
1
1 2 3 4
12
0
1
1 2 3 4
13
0
1
1 2 3 4
14
0
1
15
If the selected language has no prompts, no prompts will be heard.
*1
When setting the Mode Switch to any position (except 0):
1.
Disconnect the port cables from the VPS.
2.
Turn the power switch off.
3.
Set the Mode Switch to the desired position.
4.
Turn the power switch back on.
Document Version 3.0 2010/06
Puts the VPS in normal mode.
Reserved
Puts the VPS in DPT Integration mode. Auto Configuration starts and all ports are set
to provide Automated Attendant service.
Puts the VPS in DPT Integration mode. Auto Configuration starts and all ports are set
to provide Voice Mail service.
Reserved
Initializes the VPS. All settings are reset to their default values. Recorded messages
are erased. System prompts (including customized prompts) are preserved.
KX-TVA200 only
Puts the VPS in hard disk test mode.
Reserved
KX-TVA200 only
Initializes the VPS. All settings are reset to their default values. Recorded messages
and customized prompts are erased. All System prompts are reset to their defaults.
CAUTION
All user-recorded prompts are erased.
Reserved
KX-TVA50 only
Puts the VPS in APT Integration mode. Auto Configuration starts and all ports are set
to provide Automated Attendant service.
KX-TVA50 only
Puts the VPS in APT Integration mode. Auto Configuration starts and all ports are set
to provide Voice Mail service.
Primary Language will be set to use Language 1 prompts.
Primary Language will be set to use Language 2 prompts.
Primary Language will be set to use Language 3 prompts.
Reserved
Operation
*1
*1
*1
2.3 Names and Locations
Installation Manual 41