Panasonic KX-TVA50 Installation Manual page 100

4.2 KX-TDE, KX-TDA, and KX-TAW Series PBX Programming for DPT Integration
Example Settings (2)
Program the PBX to direct incoming trunk (CO line) calls to an operator, and to then direct those calls to the
VPS when the operator does not answer.
1.
Program the PBX so that incoming trunk (CO line) calls are directed to an operator (DIL feature).
a.
Go to the CO & Incoming Call-DIL Table & Port Setting screen.
b.
Assign the DIL Destination for each time mode and trunk (CO line) to a specific extension number
(operator extension).
c.
Click Apply to save the changed data.
2.
Program the PBX so that unanswered calls to the operator are redirected to the VPS (Intercept Routing
No Answer feature).
a.
Go to the Extension-Wired Extension-Extension Settings screen.
b.
Assign the Intercept Destination for the operator's extension to a floating extension number (VPS
Port) for each time mode.
100 Installation Manual Document Version 3.0 2010/06