Button Assignment Via Pc Programming - Panasonic KX-TVA50 Installation Manual

7.1.2 Button Assignment via PC Programming

KX-TDE, KX-TDA, and KX-TAW series PBX users can assign buttons for Live Call Screening (LCS), Two-way
Recording (TWR), Two-way Transfer (TWT), and Voice Mail Transfer (VTR) via PC Programming. Follow the
procedure below to assign each button.
1.
Go to the Extension-Wired Extension-Flexible Key screen.
2.
Select the Extension Number / Name for the extension you want to program.
3.
Assign the desired key type to the Key Location you wish to program. When Two-way Record, Two-way
Transfer or Voice Mail Transfer is selected, enter the VM Port floating extension number in Ext No. or
Floating Ext No.. When Two-way Transfer is selected, you can enter the extension number of a desired
destination under Extension Number of Mailbox. If no extension number is assigned, you will have to
enter an extension number each time you use the Two-way Transfer feature.
4.
Repeat these steps for each extension.
5.
Click Apply to save the settings.
Document Version 3.0 2010/06
7.1.2 Button Assignment via PC Programming
Installation Manual 183