Starting Up; Before Programming; Quick Setup - Panasonic KX-TVA50 Installation Manual

6.1.2 Quick Setup

6.1 Starting Up

6.1.1 Before Programming

Careful preparation before you begin programming the VPS will make the programming and customization
process easier for you and the customer.
1.
Determine the customer's needs.
–
Work with the owner/supervisor and Message Manager to build the Custom Service Greetings, Holiday
Greetings, etc.
–
Decide which ports/trunks (CO lines) should be answered by which greetings.
–
Confirm the software level of the PBX to make sure it is compatible with the features the customer
wishes to use.
2.
While programming the VPS with KX-TVA Maintenance Console, make sure subscribers do not change
any of their mailbox settings, otherwise programmed settings may not be saved properly.
3.
Work with the Message Manager (perhaps a receptionist or supervisor) to make sure he or she understands
the system as well as his or her responsibilities as the Message Manager. This will save you time in the
long run.
–
Show the Message Manager how to record system greetings. Refer to 3.6 Recording Messages in
the Manager's Manual.
–
Show the Message Manager how to transfer General Delivery Mailbox messages. Refer to
3.2 Managing the General Delivery Mailbox in the Manager's Manual.
6.1.2 Quick Setup
The Quick Setup utility allows you to set essential VPS parameters quickly and easily. It is particularly useful
when configuring the VPS for the first time or after initializing the VPS.
The following settings can be programmed with the Quick Setup utility:
–
System Security settings
–
PBX Environment settings
–
Mailbox settings
–
Port/Trunk settings
–
Date and Time settings
Note
•
Set the desired parameters in each screen then click Next or Back to go to the desired screen.
•
Each screen of the Quick Setup utility must be completed in order for the settings to take effect.
•
The screen shots in this section are examples of the KX-TVA200.
•
Settings shown in the screen shots in this section are examples only and may vary depending on the
type or settings of the connected PBX, the software version, etc.
164 Installation Manual Document Version 3.0 2010/06