Panasonic KX-TVA50 Installation Manual page 11

Introduction
About this Manual
This Installation Manual is designed to serve as an overall technical reference for the KX-TVA50/
KX-TVA200. It provides instructions for installing the VPS hardware, configuring the connected PBX for use
with the VPS, and getting started with the KX-TVA Maintenance Console software. This manual is divided into
the following sections:
Section 1 Voice Processing System Overview
This section provides a basic introduction to the VPS and its specifications. It briefly explains what the VPS
can do, and how it is connected to and interacts with the PBX.
Section 2 Installation
This section explains how to install the VPS and its optional cards.
Section 3 Installing KX-TVA Maintenance Console
This section explains how to install KX-TVA Maintenance Console on a PC.
Section 4 PBX Programming for APT/DPT Integration
This section explains how to configure selected Panasonic PBXs to use APT/DPT Integration with the VPS.
Section 5 PBX Programming for Inband Integration (KX-TVA50 only)
This section explains how to configure selected Panasonic PBXs to use Inband Integration with the VPS.
Section 6 Configuring the System
This section explains how to configure the VPS for basic operation.
Section 7 Configuring VPS Features via PC Programming
This section explains how to configure the PBX via PC Programming to use certain VPS features.
Section 8 System Maintenance
This section describes how to perform common maintenance procedures.
Index
An alphabetical listing of features and terms, as well as the page numbers of related sections.
Document Version 3.0 2010/06
Introduction
Installation Manual 11