Pbx Parameters - Panasonic PanaVOICE COURIER Installation Manual

V M P
O I C E A I L A R AM E T E R S
LAMP ON PROTOCOL – DEFAULT: (BLANK)
This field defines the DTMF sequence used to turn on a message-waiting light at the
extension, when a new message is to be delivered. (e.g.: *4X would be used for DBS
824, 40 72 and 96 systems)
Note: The field under Add Mailboxes, which determines the message notification method, must
be set to Light in order for these Protocols to work.
Note: These Lamp Protocol fields are not relevant when using API integration.
LAMP OFF PROTOCOL – DEFAULT: (BLANK)
This field defines the DTMF sequence used to turn off a message-waiting light. (e.g.:
*5X would be used for DBS 824,40 72 and 96 systems.)
Note: The field under Add Mailboxes, which determines the message notification method, must
be set to Light in order for these Protocols to work.
Note: These Lamp Protocol fields are not relevant when using API integration.
PBX P
A R AM E T E R S
On the Courier OutLook Bar, under the Parameters Tab, click the PBX icon. The
view will expand to show PBX Parameters.
A. O L P
UTSIDE INE REFIX
Enter the number required to access an outside line. Begin and end the required
digits with a comma for a one second pause (e.g. ,9,).
PanaVoice Courier
- S PBX P
EE ARAMETERS
Installation Manual 35