Panasonic KX-TVA50 Installation Manual page 90

3.3 Starting KX-TVA Maintenance Console
5.
The main window is displayed.
Click Connect ® USB from the menu bar, or click Connect on the toolbar, select USB in the Connection
6.
Mode dialog box and click Next.
Note
•
To connect to the VPS via USB, the KX-TVA USB driver must be installed on the PC, as explained
in "3.2 KX-TVA Maintenance Console Installation".
7.
Enter the installer level password (default: 1234), then click Next.
Note
•
The installer level password (also called the administrator password) is required to access the VPS
for programming. The System Administrator can change the password (see Password in
2.8.1 Administrator in the Programming Manual).
8.
Click Finish when the message Connected! is displayed.
90 Installation Manual Document Version 3.0 2010/06