2. C op y
2 - 6 6
Position
Displays the Annotation - Stamp - Position screen.
Size
Displays the Annotation - Stamp - Size screen.
You can select from three sizes for the stamp.
Annotation - Stamp - Position screen
You can set a position to print a stamp.
From the Output Format tab, select Annotation, Stamp, On,
1.
and then Position.
Make a selection.
2.
Select Save to keep your choices.
3.
Side 1
Select from any of the nine positions for the stamp.
Side 2
•
Same as Side 1
Add the stamp to the same location as the Side 1.
•
Opposite to Side 1
Add the stamp to the opposite location as the Side 1.
X er o x 4 5 90 / 4110 C op i e r /P r i n te r U s er G ui d e