Paper Jams At Tri-Fold Output Tray 2D And Lever 2G - Xerox 4110 User Manual

11 . P r ob l e m S ol v i n g
11 - 7 2
If you cannot remove the paper in Step 2, turn knob 2c to the
3.
right, then remove the jammed paper.
NOTE: If paper is torn, check for any torn pieces of paper inside
the machine.
4. Swing back the opened lever (2f or 2e), and push back the tri-
fold output tray 2d.
5. Close the Finisher right cover.
NOTE: A message will be displayed and the machine will not
operate if the Finisher right cover is even slightly open.

Paper jams at tri-fold output tray 2d and lever 2g

Make sure that the machine has stopped and then open the
1.
right cover on the light finisher.
X er o x 4 5 90 / 4110 C op i e r /P r i n te r U s er G ui d e