Trouble During Copy; Unable To Copy - Xerox 4110 User Manual

Trouble during Copy

Unable to Copy

Document not fed
properly from the
document feeder
X er o x 4 5 90 / 4110 C o pi e r /P r i n te r U s er G u i de
This section describes solutions for problems encountered during
copying.
This section describes solutions when unable to copy.
Document size is too small.
Cause
Action The minimum size of the document that can be
loaded on the document feeder is A5.
Refer to "Step 1 Load Documents" on page 2-1.
The right type of document is not being used.
Cause
Action The document feeder cannot be used with irregular
sized documents, business cards, transparencies, or
thin documents.
In addition, documents with tags, paper clips, and
cellophane tape cannot be used.
Refer to "Step 1 Load Documents" on page 2-1.
The document guides are in the incorrect position.
Cause
Action Set the document guides to correctly match the
document size.
Refer to "Step 1 Load Documents" on page 2-1.
Part of the document is ripped, and a piece of paper
Cause
remaining in the document feeder.
Action Open the document feeder cover, and remove the
piece of paper.
Refer to "Document Jams" on page 11-81.
Documents of different sizes are set.
Cause
Action When using documents of different sizes, you must
specify Mixed Size Originals, otherwise a paper
jam will result. When setting documents of different
sizes, be sure to specify Mixed Size Originals.
Refer to "Mixed Size Originals" on page 2-37.
11 . P r o b le m S o l vi n g
11-15