Error Code; Error 002-770...003-754; Other Errors - Xerox 4110 User Manual

11 . P r ob l e m S ol v i n g

Error Code

Other Errors

Category
Error Code
C P S M O
002-770
003-750
003-751
003-753
003-754
11 - 3 0
This section explains error codes.
If an error caused the printing to end abnormally or a malfunction
occurred in the printer, then an error message code (***-***) is
displayed.
If an error code not described in the following tables is displayed,
or the problem persists even after you have tried the following
solutions, contact the Customer Support Center.
Refer to the following table for error codes and information on how
to rectify the problem.
KEY POINT: If an error code is displayed, all print data of the
printer as well as print data stored in the built-in memory of
the machine is discarded.
Errors are divided into the following Categories:
• C: Copy
• P: Print
• S: Scan
• M: Mail
• O: Others Problems
Cause and Remedy
Unable to process job template due to insufficient hard
Cause
disk space.
Remove unnecessary data from the hard disk to
Remedy
increase free disk space.
Unable to store any documents with 2 Sided Book Copy
Cause
feature.
Check the 2 Sided Book Copy settings.
Remedy
Refer to "2 Sided Book Copy" on page 2-34.
The machine is unable to process size, because the
Cause
specified document area is too small.
Increase resolution or scan area size.
Remedy
The selected resolution was too large for scanning
Cause
mixed size originals using document feeder.
Decrease Scan Resolution to 200dpi or less, and
Remedy
rescan.
An error occurred in the document scanner.
Cause
Reprocess the job.
Remedy
X er o x 4 5 90 / 4110 C op i e r /P r i n te r U s er G ui d e