Pcl Emulation; Hp-Gl/2 Emulation - Xerox 4110 User Manual

PCL Emulation

HP-GL/2 Emulation

X er o x 4 5 90 / 4110 C o pi e r /P r i n te r U s er G u i de
Printer Command Language (PCL) is a Page Description
Language (PDL) used by the printer for converting incoming
information to the results seen on the printed page.
If you do not use the Integrated Controller PCL Driver and the PCL
commands are not embedded in the job file, for example an ASCII
text file, use the settings in PCL Emulation Mode to program the
job parameters. PCL Emulation Mode can be accessed from
CentreWare Internet Services so that you can set the
programming to control printer features, for example, output
destination, paper size, and print pitch.
For information about the PCL commands recognized by the
printer, go to the PDL Reference Guide, which can be found on
www.xerox.com under Support & Drivers > printer number >
Integrated Controller > User Documentation.
HP-GL/2 or Hewlett-Packard Graphics Language 2 is a Page
Description Language (PDL) for representing vector graphics,
which are composed of lines and geometrical shapes instead of
bitmaps.
If your job does not have the HP-GL/2 settings embedded, HP-GL/
2 logical printer settings can be set in CentreWare Internet
Services > Properties tab > Emulation Settings. For information on
using CentreWare Internet Services, see the System
Administration Guide.
Consult your HP-GL/2 programming guide for specific settings.
1 2. Sp ec i f ic a t io n s
12-17