4. Ma i lb o x M an a ge m en t
4 - 7 0
Select the Paper/Output tab:
4.
Select Save to Mailbox from the Job Type menu.
5.
Enter your Mailbox Number, Password and then select OK.
6.
NOTE: There are considerations and limitations when sending
jobs to the mailbox for printing.
•
Settings, such as finishing, that are grayed-out on the print
driver (as shown below) must be set at the mailbox.
•
Default printer driver settings that are grayed-out are not sent
with the job to the mailbox. An example of this is if your default
print driver setting is 2 Sided Print; that setting would be
ignored at the print driver and two-sided printing would have to
be selected at the mailbox print settings.
•
Some settings, such as paper size, cannot be changed at the
mailbox if they have been selected on the print driver dialog.
•
A full suite of features may not be available when printing jobs
from the mailbox, including: watermarks and annotations.
Select OK to send your job to your mailbox. From your
7.
mailbox, select your job and adjust features as needed.
X er o x 4 5 90 / 4110 C op i e r /P r i n te r U s er G ui d e