Xerox 4110 User Manual page 422

11 . P r ob l e m S ol v i n g
Category
Error Code
C P S M O
091-311
116-701
116-702
116-703
116-710
116-713
116-714
116-720
116-740
116-747
116-748
116-749
11 - 4 4
Cause and Remedy
Charge Corotron cleaner failure.
Cause
Power-cycle the machine. If the error is not fixed by
Remedy
performing the relevant remedy, contact the Customer
Support Center.
2 sided print could not be made.
Cause
Print each side separately.
Remedy
Printing was performed using a substitute font.
Cause
Check the print data.
Remedy
An error occurred during PostScript processing.
Cause
Either confirm the print data or click Spool Settings on
Remedy
the Details tab in the print driver to set bi-directional
communications to off.
A probable cause is that the correct document size could
Cause
not be judged as the receive data exceeded the HP-GL/2
spool size.
Increase the size assigned to HP-GL/2 auto-layout
Remedy
memory.
Job was divided and printed due to insufficient disk
Cause
space.
Remove unnecessary data from the hard disk to
Remedy
increase free disk space.
An HP-GL/2 command error occurred.
Cause
Check the print data.
Remedy
An error occurred during printing as there was
Cause
insufficient memory.
Stop unnecessary ports and remove unnecessary data
Remedy
from the hard disk to increase free disk space.
Numerical value operation error occurred as a value
Cause
exceeding the value limit of the printer was used in the
print data.
Check the print data.
Remedy
There are too many paper margin values for the
Cause
HP-GL/2 effective coordinate area.
Reduce the paper margin values, and instruct it to print
Remedy
again.
There is no plot data in the HP-GL/2 print data.
Cause
Check the print data.
Remedy
Job cancelled because the specified font was
Cause
unavailable.
Install the font or set up a font replacement on the print
Remedy
driver side.
X er o x 4 5 90 / 4110 C op i e r /P r i n te r U s er G ui d e