High Capacity Stacker (Hcs); Overview; Identifying The Components - Xerox 700 Digital Color Press User Manual

Xerox 700 Digital Color Press

High Capacity Stacker (HCS)

Overview

The High Capacity Stacker (HCS) is an optional finishing device
that provides stacking and offsetting capabilities for output to
a Stacker Tray. The HCS connects to the right side of the digital
press by way of the Interface Module. The HCS replaces the
Offset Catch Tray (OCT).

Identifying the components

The major components of the HCS are as follows:
Control Panel - Provides manual control of the various functions
of the HCS.
Top Tray - Up to 500 sheets are transported to the Top Tray:
•
•
•
•
Bypass - Only used when a second stacking/finishing device is
installed. This path transports collated sets through the HCS to a
connected finishing device or to another HCS.
Stacker Tray/Cart - Collated sets (up to a total of 5000 sheets) are
transported to the Stacker Tray located on a moveable Stacker
Cart.
If your system configuration has two stackers, the bypass on the
second stacker is not used.
User Guide
Downloaded From ManualsPrinter.com Manuals
When sheets are purged after a paper jam.
When the Sample Set button is selected.
When selected as an Output Location.
Labels must be sent to the Top Tray.
Interface Module
High Capacity Stacker (HCS)
Addendum
2
1
3
10-7