Command Syntax Conventions; Help Command; Exit Command; Figure 171 Cli Help : Sample Output - ZyXEL Communications P-861H-G2 User Manual

Prestige 861H Series User's Guide
Note: Type all commands as displayed on the screen.

29.1.3 Command Syntax Conventions

Command keywords are in courier new font.
The | symbol means "or".
Required fields in a command are enclosed in angle brackets <>. Use the following command
to select a baud rate from 1 to 5.
Optional fields in a command are enclosed in square brackets [], for example, year; month and
day are optional in the following command. This command just displays the date if you don't
specify the year, month and day parameters.
Commands can be abbreviated to the smallest unique string that differentiates the command.
For example the "system date" command could be abbreviated to "s d".

29.2 help Command

Type "help" or "?" to display a list of valid commands or type a command followed by "help"
or "?" to display a list of associated subcommand
information.

Figure 171 CLI Help : Sample Output

Copyright (c) 1994 - 2005 ZyXEL Communications Corp.
P861H> help
Valid commands are:
sys
ip
P861H>

29.3 exit Command

Syntax:
This command ends the console or telnet session.
251
sys baud <1|2|3|4|5>
sys date [year month day]
exit ether
bridge vdsl
exit
The following figure shows sample help
s.
wan
Chapter 29 Introduction to CLI