Table of Contents
Advertisement
Prestige 861H Series User's Guide
Figure 90 Menu 11.8 Advance Setup Options
The following table describes the fields in this menu.
Table 47 Menu 11.8 Advance Setup Options
FIELD
PPPoE pass-through
When you have completed this menu, press [ENTER] at the prompt "
or ESC to Cancel:
163
Menu 11.8 - Advance Setup Options
PPPoE pass-through= No
Press ENTER to Confirm or ESC to Cancel:
DESCRIPTION
Press [SPACE BAR] to select Yes and press [ENTER] to enable PPPoE pass
through. In addition to the Prestige's built-in PPPoE client, you can enable
PPPoE pass through to allow up to ten hosts on the LAN to use PPPoE client
software on their computers to connect to the ISP via the Prestige. Each host
can have a separate account and a public WAN IP address.
PPPoE pass through is an alternative to NAT for applications where NAT is
not appropriate.
Press [SPACE BAR] to select No and press [ENTER] to disable PPPoE pass
through if you do not need to allow hosts on the LAN to use PPPoE client
software on their computers to connect to the ISP.
" to save your configuration, or press [ESC] at any time to cancel.
Press ENTER to Confirm
Chapter 17 Remote Node Configuration
Advertisement
Table of Contents
Troubleshooting
