Firmware Screen; Figure 60 Diagnostic: Dsl Line; Table 32 Diagnostic: Dsl Line - ZyXEL Communications P-861H-G2 User Manual

Figure 60 Diagnostic: DSL Line

The following table describes the fields in this screen.

Table 32 Diagnostic: DSL Line

LABEL
Reset VDSL
Line
ATM Loopback
Test
Back

12.5 Firmware Screen

Find firmware at www.zyxel.com in a file that (usually) uses the system model name with a
.bin extension, for example, "Prestige.bin". The upload process uses HTTP (Hypertext
Transfer Protocol) and may take up to two minutes. After a successful upload, the system will
reboot. See
Chapter 12 Maintenance
Click this button to reinitialize the VDSL line. The large text box above then displays
the progress and results of this operation, for example:
"Start to reset VDSL
Loading VDSL modem F/W...
Reset VDSL Line Successfully!"
Click this button to start the ATM loopback test. Make sure you have configured at
least one PVC with proper VPIs/VCIs before you begin this test. The Prestige sends
an OAM F5 packet to the DSLAM/ATM switch and then returns it (loops it back) to the
Prestige. The ATM loopback test is useful for troubleshooting problems with the
DSLAM and ATM network.
Click this button to go back to the main Diagnostic screen.
Chapter 24 on page 214
Prestige 861H Series User's Guide
DESCRIPTION
for upgrading firmware using FTP/TFTP commands.
128