Remote Management Configuration; Remote Management Overview; Remote Management Limitations - ZyXEL Communications P-861H-G2 User Manual

This chapter provides information on configuring remote management.

9.1 Remote Management Overview

Remote management allows you to determine which services/protocols can access which
Prestige interface (if any) from which computers.
You may manage your Prestige from a remote location via:
• Internet (WAN only)
• ALL (LAN and WAN)
• LAN only,
• Neither (Disable).
To disable remote management of a service, select Disable in the corresponding Server
Access field.
You may only have one remote management session running at a time. The Prestige
automatically disconnects a remote management session of lower priority when another
remote management session of higher priority starts. The priorities for the different types of
remote management sessions are as follows.
1 Telnet
2 HTTP

9.1.1 Remote Management Limitations

Remote management over LAN or WAN will not work when:
• A filter in SMT menu 3.1 (LAN) or in menu 11.5 (WAN) is applied to block a Telnet,
FTP or Web service.
• You have disabled that service in one of the remote management screens.
• The IP address in the Secured Client IP field does not match the client IP address. If it
does not match, the Prestige will disconnect the session immediately.
• There is already another remote management session with an equal or higher priority
running. You may only have one remote management session running at one time.
Chapter 9 Remote Management Configuration
C
Remote Management
Prestige 861H Series User's Guide
H A P T E R
Configuration
9
100