Display Symbols And Key Operation - A&D GX-300 Instruction Manual

4. DISPLAY SYMBOLS AND KEY OPERATION

Key operation
Key operation affects how the balance functions. The basic key operations are:
"Press and release the key immediately" or "Press the key"
= normal key operation during measurement
"Press and hold the key"
Display symbols
・Displays data stored in memory
・Displays the weighing data relative to the
weighing capacity, in percentage, in the
weighing mode (Capacity indicator)
Processing indicator
Stabilization indicator
Standby indicator
Data number of the
data currently displayed
Processing indicator
Prior notice indicator of
automatic self calibration
Each key, when pressed or when pressed and held, functions as follows:
Key When pressed
Turns the display on and off. The standby indicator is displayed when the display is
turned off. The weighing mode is enabled when the display is turned on.
This key is available anytime. Pressing the key during operation will interrupt the
operation and turn the display off.
In the weighing mode, turns the minimum
weighing value on and off.
In the counting or percent mode, enters
the sample storing mode.
Switches the weighing units stored in the
function table. Refer to "5. WEIGHING
UNITS".
Performs calibration of the balance using
the internal mass.
Stores the weighing data in memory or
outputs to a printer or personal computer
using the RS-232C interface (Factory
setting), depending on the function table
settings.
Sets the display to zero.
Weighing data
or stored data
Blinking indicators
When pressed and held
Enters the function table mode. Refer to
"10. FUNCTION TABLE".
Performs response adjustment and self
check.
Displays other items of the calibration
menu.
No function at the factory setting
By changing the function table:
Outputs "Title block" and "End block" for
GLP report.
Displays the data memory menu.
11
Response indicators
(Displayed for about 30 seconds
when weighing starts.)
Animal mode indicator
Comparator
indicators
Units
Interval memory
standby indicator
Interval memory
active indicator