Storing Units - A&D GX-300 Instruction Manual

5-2 Storing Units

The units or modes can be selected and stored in the function table. The sequence of displaying the
units or modes can be arranged to fit the frequency of use.
The units stored are maintained in non-volatile memory, even if the AC adapter is removed.
Select a unit or mode and arrange the sequence of display as follow s:
1 Press and hold the SAMPLE key until
the function table is displayed, then release the key.
2 Press the SAMPLE key several times to display
1Unit .
3 Press the PRINT key to enter the unit selection mode.
4 Specify a unit or mode in the order to be displayed
using the following keys.
SAMPLE key
RE-ZERO key
5 Press the PRINT key to store the units or modes. The
balance displays
menu of the function table.
6 Press the CAL key to exit the function table. Then the
balance returns to the weighing mode with the selected unit.
7
To select other unit or mode for weighing, press the MODE key.
To sequentially display the units.
To specify a unit or mode. The
stabilization indicator
appears when the displayed unit
or mode is specified.
end
and then displays the next
ba5fnc of
15
Press and hold
Press
several times
Select
Displays the units
sequentially.
Specify
Store