Weighing Units; Units - A&D GX-300 Instruction Manual

5-1 Units

With the GX series balance, the following weighing units and weighing modes are available :
g
Pct OZ
PC
Counting mode
Percent mode
Density mode (To use this mode, it must be stored in the function table as described on
page 15. For details about this mode, refer to "15. DENSITY MEASUREMENT".
To select this mode, press the MODE key until the processing indictor
blinks with the unit "g" displayed. "DS" appears only when the density
value is displayed.)
Programmable-unit (No unit displayed. For details, refer to "14. PROGRAMMABLE-UNIT".)
A unit or mode can be selected and stored in the function table as described on page 15.
If a weighing mode (or unit of weight) has been turned off, that mode or unit will be missing in the
sequence. Tael has four varieties, one of which can be selected and installed at the factory.
To select a unit or mode for weighing, press the MODE key.
For details about the units and modes, see the table below:
Name (unit, mode)
Gram
Counting mode
Percent mode
Ounce (Avoir)
Pound
Pound/Ounce
Troy Ounce
Metric Carat
Momme
Pennyweight
Grain (UK)
Tael (HK general, Singapore)
Tael (HK jewelry)
Tael (Taiwan)
Tael (China)
Tola (India)
Messghal
Density mode
(See note below)
Programmable-unit (Multi-unit)
Note: The blinking processing indicator with "g" indicates that the density mode is selected.

5. WEIGHING UNITS

Lb ct
OZ OZt
L
Abbrev. Display
g
PC
Pct
OZ
Lb
OZ
L
OZt
ct
mm
dwt
GN
TL
t
MS
DS
is used to
show the density.
Mlt
12
mm
dwt TL
GN
Function table
(Storing mode)
l0
t DS
MS
Conversion factor
1 g =
1 g
28.349523125 g
453.59237 g
1Lb=16 oz,
1 oz=28.349523125 g
31.1034768 g
0.2 g
3.75 g
1.55517384 g
0.06479891 g
37.7994 g
37.429 g
37.5 g
31.25 g
11.6638038 g
4.6875 g